.png "Adak Process")
Mekanik Cihazları
ALPHA2 32-80 180
Circulator pumps
Suitable for
Commercial heating
Domestic heating
Industrial heating
ALPHA2 is a circulator pump designed for heating and air conditioning systems. AUTOADAPT continuously adapts the pump to system demands for optimal comfort, low energy consumption and simple commissioning
ALPHA SOLAR 25-145 N 180
Circulator pumps
ALPHA SOLAR 25-145 N 180
No. 99206628
Suitable for
Domestic heating
ALPHA SOLAR is a circulator pump designed for thermal solar systems. It features three constant-curves modes, and the speed can also be controlled by a low-voltage PWM signal from a solar controller.
ALPHA1 15-60 130
Circulator pumps
Suitable for
Commercial heating
Domestic heating
Industrial heating
ALPHA1 L 25-60 130
Circulator pumps
ALPHA1 L 25-60 130
No. 99160583
Suitable for
Commercial heating
Domestic heating
Industrial heating
ALPHA1 20-40 N 150
Circulator pumps
ALPHA1 20-40 N 150
No. 99452178
Suitable for
Commercial hot water recirculation
Domestic hot water recirculation
ALPHA1 N is a high-efficiency circulator pump with stainless-steel pump housing suitable for domestic hot-water systems. Featuring integrated differential-pressure control as well as constant-curve mode.
ALPHA2 25-60 180
Circulator pumps
Circulator pumps
ALPHA2 25-60 180
No. 99411175
Suitable for
Commercial heating
Domestic heating
Industrial heating
ALPHA2 is a circulator pump designed for heating and air conditioning systems. AUTOADAPT continuously adapts the pump to system demands for optimal comfort, low energy consumption and simple commissioning
ALPHA2 L 25-60 130
Circulator pumps
Circulator pumps
ALPHA2 L 25-60 130
No. 99925390
Suitable for
Commercial heating
Domestic heating
Industrial heating
ALPHA2 L is a high-efficiency circulator pump for basic functionality needs in heating systems. The pump features three fixed speed curves, two proportional-pressure curves and two constant-pressure curves.
ALPHA2 32-40 N 180
Circulator pumps
Circulator pumps
ALPHA2 32-40 N 180
No. 99411432
Suitable for
Commercial hot water recirculation
Domestic hot water recirculation
ALPHA2 N is a circulator pump with stainless-steel pump housing for domestic hot-water systems. AUTOADAPT continuously adapts the pump to system demands for optimal comfort and low energy consumption.
ALPHA3 25-60 180
Circulator pumps
Circulator pumps
ALPHA3 25-60 180
No. 99371959
Suitable for
Commercial heating
Domestic heating
Industrial heating
ALPHA3 is a circulator pump designed for heating systems and is completely controlled with the Grundfos GO Remote app which allows to easily hydronically balance radiator- and underfloor-heating systems.
COMFORT 15-14 BX TA
Circulator pumps
COMFORT 15-14 BX TA
No. 99302332
Suitable for
Domestic hot water recirculation
COMFORT AUTOADAPT is an energy-efficient hot-water recirculation pump designed for one- and two-family houses. Adapting to the usage pattern, the pump both provides maximum comfort and energy savings.
COMFORT 15-14 BU PM
Circulator pumps
COMFORT 15-14 BU PM
No. 99831284
Suitable for
Domestic hot water recirculation
COMFORT DIGITAL TIMER is an energy-efficient hot-water recirculation pump designed for one- and two-family houses. The pump has additional control via timer function, saving energy without affecting comfort.
MAGNA3 D 100-120 F
Circulator pumps
MAGNA3 D
Suitable for:
Commercial air conditioning
Commercial heating
Domestic heating
View more
The MAGNA3 D circulator pump means double the performance and reduced downtime. The two pumps communicate wirelessly and connects directly with the Grundfos GO app via Bluetooth.
MAGNA3 65-120 F N
Circulator pumps
MAGNA3 N
Suitable for:
Commercial hot water recirculation
Domestic hot water recirculation
The MAGNA3 N offers all of the features of a MAGNA3 in stainless-steel, if the media requires this, for example in domestic-hot water applications. The MAGNA3 has integrated Bluetooth allowing it to connect directly with the Grundfos GO APP.
UP OEM
Circulator pumps
UP OEM
UP OEM are high efficiency circulator pumps suitable for all HVAC applications, from boilers and heat pumps to heat interface unit systems.
UPS 40-50 F 250
Circulator pumps
UP, UPS
Suitable for:
Commercial heating
Domestic hot water recirculation
Grundfos UP single-speed circulator pumps are designed for heating systems, while the three-speed UPS circulator pumps are used in central and district heating system while also being suitable for mixing loops in large systems. Both pumps provide reliable and maintenance-free operation.
UPS 32-100 N 180
Circulator pumps
UP, UPS (N)
Suitable for:
Commercial heating
Domestic hot water recirculation
Grundfos UP, UPS N circulator pumps have a corrosion-free stainless-steel pump housing and are recommended for domestic hot-water recirculation and underfloor heating systems. UP, UPS N can be connected to an on/off time switch to limit pump operation to periods when hot water is usually required.
UP, UPS Series 100
Circulator pumps
UP, UPS Series 100
Suitable for:
Commercial heating
Domestic hot water recirculation
The Grundfos UP, UPS Series 100 circulator pumps are designed for heating, domestic hot-water, cooling and air-conditioning systems. The pumps are available in various materials and as twin-head variants, making them suitable for a range of applications. The pumps are reliable and maintenance-free.
UPA 15-90 N
Circulator pumps
UPA, Home booster
Suitable for:
Domestic hot water recirculation
UPA is a compact domestic high-efficiency in-line boosting pump designed for residential homes. UPA increases water pressure to required levels at showers, taps and other tapping points.
UPM10, UPM20 OEM
Circulator pumps
UPM10, UPM20 OEM
UPM10, UPM20 are high-efficiency OEM circulator pumps designed for integration in boilers, heat pumps and other heating systems requiring high flow. They can be operated via control signal or as a standalone pump.
UPS 80-60/4 F 360
Circulator pumps
UPS
Suitable for:
Industrial heating
UPS is a three-speed circulator pump designed for heating and air-conditioning systems and is also used for central and district heating systems. The pump provides reliable and maintenance-free operation.
UPS 32-60 F B 220
Circulator pumps
UPS (B)
Suitable for:
Industrial heating
UPS B is a three-speed circulator pump with a corrosion-resistant bronze pump housing designed for hot-water recirculation. The pump provides reliable and maintenance-free operation.
UPS Series 200
Circulator pumps
UPS Series 200
Suitable for:
Commercial air conditioning
Commercial heating
Commercial hot water recirculation
View more
UP, UPS Series 200 are single- and three-speed circulator pumps designed for domestic and commercial heating systems. They are available in various materials, making them suitable for many applications.
UPS2 15-40/60 130
Circulator pumps
UPS2
Suitable for:
Commercial heating
Domestic hot water recirculation
Grundfos UPS2 circulator pumps feature advanced control modes enabling adjustment of pump performance to the actual system requirements in one- and two-pipe heating systems. The motor is based on permanent-magnet and compact-rotor technology securing silent operation and low energy consumption.
UPSD 50-120 F 280
Circulator pumps
UPSD
Suitable for:
Industrial heating
UPSD is a twin-head variant of the UPS three-speed pump designed for heating and air-conditioning systems. UPSD is installed where duty and standby operation is required to obtain extra reliability.
UPSD 40-100 F 250
Circulator pumps
UPSD
Suitable for:
Commercial heating
Domestic hot water recirculation
Grundfos UPSD is a twin-head variant of the UPS three-speed circulator pumps, designed for circulation of liquids in heating and air-conditioning systems. UPSD pumps are installed where duty and standby operation is required to obtain extra reliability.
PH-RX Control Unit
CONTROL UNIT
Control and regulating system for pH and Redox, made of eSELECT-M2 controller, block valves, connection for tube 10x14 mm, water filter with washable net cartridge 150 microns, methacrylate probe holder, pH electrode with plastic body with cable 1 mt (Tmax=60° C Pmax=6 bar) working range 0÷14 pH, Redox electrode with plastic body with cable 1 mt (Tmax=60° C Pmax=6 bar) working range ± 1.000 mV, 4 buffer solution 55ml bottles (pH 4, 7, 9 and Redox 650 mV), 2 manual pumps wiring connection available in the central box trunking. Suitable for software EtaCloud connection; optional accessory: connectivity kit.
Panel dimensions 400 x 600 x 0.80 mm
PH-RX-F Control Unit
CONTROL UNIT
Control and regulating system for pH and Redox, made of eSELECT-M2 controller, block valves, connection for tube 10x14 mm, water
filter with washable net cartridge 150 microns, methacrylate probe holder with proximity switch and adjustment flow system, manual
sampling, pH electrode with plastic body with cable 1 mt (Tmax=60° C Pmax=6 bar) working range 0÷14 pH, Redox electrode with
plastic body with cable 1 mt (Tmax=60° C Pmax=6 bar) working range ± 1.000 mV, 4 buffer solution 55ml bottles (pH 4, 7, 9 and Redox
650 mV), 2 manual pumps wiring connection available in the central box trunking. Suitable for software EtaCloud connection; optional accessory: connectivity kit.
Panel dimensions 400 x 600 x 0.80 mm
P Cl-F Control Unit
CONTROL UNIT
Control and regulating system for free chlorine, made of eSELECT-M1 controller, block valves, connection for tube 10x14 mm, water
filter with washable net cartridge 150 microns, methacrylate probe holder with proximity switch and adjustment flow system, manual
sampling, free inorganic and organic chlorine probe, (0 – 20) ppm measuring range, probe shows low pH dependence (pH working
range 4- 12 pH), chlorine measuring is not affected by isocyanuric acid, surfactants/flocculants presence, the probe is automatic temperature-
compensated, 0,7 mt probe cable, 1 manual pump wiring connection available in the central box trunking. The unit required a
constant flow rate between 30 and 40 l/h, do not exceed the maximum operating pressure of 1 bar (free discharge at probe holder outlet)
while water temperature cannot overcome 45°C. The probe has integrated temperature compensation. Suitable for software EtaCloud connection; optional accessory: connectivity kit.
Panel dimensions 400 x 600 x 0.80 mm
PH-Cl-F P Control Unit
CONTROL UNIT
Control and regulating system for free chlorine and pH, made of eSELECT-M2 controller, block valves, connection for tube 10x14 mm, water
filter with washable net cartridge 150 microns, methacrylate probe holder with proximity switch and adjustment flow system, manual sampling,
free inorganic and organic chlorine probe, (0 – 20) ppm measuring range, probe shows low pH dependence (pH working range 4-12 pH), chlorine
measuring is not affected by isocyanuric acid, surfactants/flocculants presence, the probe is automatic temperature-compensated, 0,7 mt
probe cable, pH electrode with plastic body with cable 1 mt (Tmax=60° C Pmax=6 bar) working range 0÷14 pH, 3 buffer solution 55ml bottles
(pH 4, 7 and 9), 2 manual pumps wiring connection available in the central box trunking. The unit required a constant flow rate between 30 and
40l/h, do not exceed the maximum operating pressure of 1 bar (free discharge at probe holder outlet) while water temperature cannot overcome
45°C. The probe has integrated temperature compensation. Suitable for software EtaCloud connection; optional accessory: connectivity kit.
Panel dimensions 400 x 600 x 0.80 mm
EControl
Controllers
Measure and control instruments.eControl series controllers are designed to be used in all applications where continuous measurement of the chemical
parameters of the water is required. They are made with the use of microcontrollers and have a galvanically isolated
measurement stage. The versions are available with single or double measuring channels, independently configurable
Eligere 01 CD Cool
Controllers
Instruments to measure and control the electric conductivity.Eligere 01 CD Cool is an electrical conductivity measurement and control instrument, specifically designed for cooling towers.
The programming menu contains functions specifically designed for this application, while a wide graphic
display and a user-friendly navigation menu make it a very simple product for the end users.
Eligere 01
Controllers
Measure and control instruments.Eligere 01 series is a family of controllers with one channel measure (+ temperature). The wide graphic display and
the user-friendly navigation make it a very simple product for the end-user. Predisposed for Eatcloud connection,
thanks to the “Connection Kit” (not included with the controller) the eSelect-SR can be managed in a remote way.
Eligere 02
Controllers
Measure and control instruments.Eligere 02 series is a family of controllers using two measurement channels (+ temperature). The wide graphic display and
the user-friendly navigation make it a very simple and intuitive product for end-users. Predisposed for Eatcloud connection,
thanks to the “Connection Kit” (not included with the controller), the Eligere 02 can be managed remotely.
Minimus Oxygen
Controllers
The Minimus series are professional controllers designed for advanced high-end water treatment applications. All models are equipped with analogue and digital outputs that can be set by the end user – who has full programming autonomy – via software. Can be pogrammed as dissolved oxygen controller (primary measure) and as temperature measuring device (secondary measure).
GSD SERIES
EN 733 Standardised Pumps
GSD SERIES is the EBARA range of Standardized pumps manufactured according to EN733 with stub-shaft and rigid coupling, with cast iron body, impeller in cast iron and bronze. GSD pumps represent a versatile range suitable for a lot of applications and offer significant advantages in terms of reliability, efficiency and cost saving.
3(L)(4) SERIES
EN 733 Standardised Pumps
Centrifugal pump standardised to EN733 in AISI 304 stainless steel AISI 304 (3 SERIES), AISI 316 stainless steel (3L SERIES), with 2 or 4 poles motor and with Back pull-out.
3D(4) SERIES
EN 733 Standardised Pumps
Standardised cast iron centrifugal pump with AISI 304 and AISI 316 steel impeller, axial suction and radial discharge with 2 or 4 poles motors. Available in three versions. Equipped with Back pull-out design that allows the motor, coupling, bracket and impeller to be removed without compromising the pump body or disassembling the piping. Many types of mechanical seals can be mounted on electric pumps to meet different requirements. Suitable for application in heating and air conditioning systems, water supply of civil, agricultural and industrial plants, pressurisation and fire-fighting.
MD - MMD(4)
EN 733 Standardised Pumps
Standardised cast iron monobloc centrifugal pump with AISI 304 impeller for MD and cast iron impeller for MMD, with 2 and 4 poles motors with high energy efficiency. Equipped with a Back pull-out design that allows the motor block to be removed without having to disconnect the piping body for maintenance.
GS SERIES
EN 733 Standardised Pumps
Standardised single-stage cast iron centrifugal pump and electric pump from DN 32 up to DN 200-500. Seal in two different versions: Silicon Carbide/Carbon/EPDM mechanical and packing. Suitable for heavy-duty applications such as industrial processes and cooling systems.
1124A-BXB SERIES
Liquid Specific Product Line
The 1124A-BXB Series™ internal gear pump with O-Pro® Seal technology is the perfect solution for boxboard, paper cartons, corrugating adhesives, and more due to its reliable sealing as well as easy maintenance. It can handle flows from 8 to 400 GPM (1.8 to 91 m³/h).
1224A-ASP SERIES
Liquid Specific Product Line
The 1224A-ASP Series™ internal gear pump is designed specifically for handling asphalt, bitumen, pitch, bunker oils, residual oils and related materials that solidify at ambient temperatures. They can handle flows from 14-280 GPM (3 to 60 m³/h).
1224A-BXB SERIES
Liquid Specific Product Line
The 1224A-BXB Series™ internal gear pump with O-Pro® Seal technology is the perfect solution for boxboard, starch adhesives, hot melt, and more due to its reliable sealing as well as easy maintenance. It can handle flows from 8 to 400 GPM (1.8 to 91 m³/h).
1224A-CHC SERIES
Liquid Specific Product Line
The 1224A-CHC Series™ cast iron internal gear pump is designed with chocolate in mind. With a Double O-Ring seal, this chocolate pump is instrumental in leak-free pumping. Some other applications include Cocoa Liquor, all Chocolates and Pastes (CHC1 models) and Cocoa Butter, Oils, Lecithin (CHC2 Models). It can handle up to 400 GPM (0.2 to 90 m³/h).
124E SERIES
Liquid Specific Product Line
The 124E Series™ internal gear electric heated pump is the perfect solution for your asphalt needs because it warms the asphalt within the pump prior to startup. It can hold capacities up to 1600 GPM (364 m³/h).
324E SERIES
Liquid Specific Product Line
The 324E Series™ internal gear electric heated pump is the perfect solution for your asphalt needs because it warms the asphalt within the pump prior to startup. It can hold capacities up to 1600 GPM (364 m³/h).
4197-SEP SERIES
Liquid Specific Product Line
The 4197-SEP Series™ internal gear ethanol extraction pump is the perfect solution for the challenging cold temperatures in the hemp market. It has superior self-priming capabilities and designed for continuous or intermittent duty cycle. This pump can handle flows up to 75 GPM (17 m³/h).
432-X SERIES
Liquid Specific Product Line
The 432-X Series™ internal gear pump is the ideal solution fuel oils, glycols, lube oils, and more liquids. It can handle up to 20 GPM (0 to 4.5 m³/h).
456 SERIES
Liquid Specific Product Line
The 456 Series™ internal gear pump is the ideal solution for fuel oil, glycol, and lube oil. It can handle capacities up to 3 GPM (0.7 m³/h).
4924A SERIES™ Ammonia Pump
Liquid Specific Product Line
The 4924A Series™ internal gear pump is the perfect solution for ammonia pumping (refrigerant R-717) due to efficiently keeping the ammonia in liquid form to make removing heat easier. It can handle capacities from 10 to 60 GPM (2.3 to 13.6 m³/h).
ST-D
Motor Driven Pumps
Membrane motor-driven dosing pumps.The metering pumps ST-D series are driven by an electric motor, the dosage takes place thanks to a PTFE
membrane. The ST-D series pumps make their robustness and reliability their main characteristic.
P
Motor Driven Pumps
Plunger Piston Motor-driven pumps.The metering pumps P series are driven by an electric motor, the dosage takes place thanks to a piston. The
P series pumps make their robustness and reliability their main characteristic
32 SERIES
Motor Speed Product Line
The 32 Series™ internal gear pump is the ideal solution for light, medium and intermittent service handling of a variety of liquids like lube oil and fuel oil. It can handle up to 450 GPM (102 m³/h).
4195 SERIES
Motor Speed Product Line
The 4195 Series™ internal gear pump is the perfect solution for refined fuels, lube oils, rotating equipment lubrication, and more due to its high speed operation for thin to moderate viscosity applications. It can handle flows up to 580 GPM (132 m³/h).
4197 SERIES
Motor Speed Product Line
The 4197 Series™ internal gear pump is the ideal solution for compressor lubrication, fuels, and lube oils due to its high speed operation and ability to withstand high working pressures. It can handle flows up to 75 GPM (17 m³/h).
475 SERIES
Motor Speed Product Line
The 475 Series™ internal gear pump is the ideal solution for filtering, circulating, transferring, and lubricating because of its positive, smooth delivery of product. It can handle flows up to 30 GPM (7 m³/h).